radiusd: error while loading shared libraries: libfreeradius-radius-020206.so: cannot open shared object file: No such file or directory
/sbin/ldconfig -vCould not link driver rlm_sql_mysql: rlm_sql_mysql.so: cannot open shared object
apt-get install libmysqlclient-devbackup:
mysqldump -hlocalhost -uroot -p --opt -R databasename | gzip -9 > wp.gzrecover:
gunzip < wp.gz | mysql -uroot -p wordpress
Strongswan install
1. Prepare the environment:
apt-get install -Y build-essential libssl-dev libpam-dev2. Get the package:
wget http://download.strongswan.org/strongswan-5.2.1.tar.bz23. Install the package:
tar xjvf strongswan-5.2.1.tar.bz2
cd strongswan-5.2.1
./configure --enable-eap-identity --enable-eap-md5 --enable-eap-mschapv2 --enable-eap-tls --enable-eap-ttls --enable-eap-peap --enable-eap-tnc --enable-eap-dynamic --enable-eap-radius --enable-xauth-eap --enable-xauth-pam --enable-dhcp --enable-openssl --enable-addrblock --enable-unity --enable-certexpire --enable-radattr --enable-tools --disable-gmp --disable-static --enable-shared --enable-kernel-libipsec && make && make install
Note: 1) If you use the OVZ based VPS, you must add --enable-kernel-libipsec, otherwise not.
2) 5.2.1 can be replaced by the other version.
Configuration of Strongswan
The default configuration is under:
/usr/local/etc/1. ipsec.conf: It is the configuration of every client part. You can config it like the following below:
config setup
uniqueids=no
conn iOS_cert
keyexchange=ikev1
# strongswan version >= 5.0.2, compatible with iOS 6.0,6.0.1
fragmentation=yes
left=%defaultroute
leftauth=pubkey
leftsubnet=0.0.0.0/0
leftcert=server.cert.pem
right=%any
rightauth=eap-radius
rightauth2=xauth
rightsourceip=10.0.0.0/24
rightcert=client.cert.pem
auto=add
dpdaction=clear
# also supports iOS PSK and Shrew on Windows
conn android_xauth_psk
keyexchange=ikev1
left=%defaultroute
leftauth=psk
leftsubnet=0.0.0.0/0
right=%any
rightauth=psk
rightauth2=xauth-radius
rightsourceip=10.0.0.0/24
dpdaction=clear
ikelifetime=500h
lifetime=200s
auto=add
# compatible with "strongSwan VPN Client" for Android 4.0+
# and Windows 7 cert mode.
conn networkmanager-strongswan
keyexchange=ikev2
left=%defaultroute
leftauth=pubkey
leftsubnet=0.0.0.0/0
leftcert=server.cert.pem
right=%any
rightauth=pubkey
rightauth=pubkey
rightsourceip=10.0.0.0/24
rightcert=client.cert.pem
auto=add
conn radius
keyexchange=ikev2
left=%any
leftsubnet=0.0.0.0/0
leftauth=pubkey
leftcert=server.cert.pem
right=%any
rightsourceip=10.0.0.0/24
rightauth=eap-radius
rightsendcert=never
eap_identity=%any
auto=add
dpdaction=clear
2. ipsec.secrects:
: RSA server.pem
#this should be your ikev1 psk key
: PSK "yourPSK"3. strongswan.conf:
# strongswan.conf - strongSwan configuration file
charon {
# duplicheck.enable = no
dns1 = 208.67.222.222
dns2 = 208.67.220.220
# for Windows only
nbns1 = 208.67.222.222
nbns2 = 208.67.220.220
filelog {
/var/log/strongswan.charon.log {
time_format = %b %e %T
default = 1
append = no
flush_line = yes
}
}
plugins {
eap-radius {
accounting = yes
servers {
radiusServer {
secret = yoursecret
address = radius.xxx.com
auth_port = 1812 # default
acct_port = 1813 # default
}
}
dae {
enable = yes # enable DAE extension
listen = 0.0.0.0 # listen address, default to all
port = 3799 # port to listen for requests, default
secret = yoursecret # shared secret to verify/sign DAE messages
}
}
}
}
Note:
1) radius.xxx.com is your radius server address/ip.
2) secret can be custom by yourself.
3) The two secret can be different.
Install the certificates
ipsec pki --gen --outform pem > ca.pem
ipsec pki --self --in ca.pem --dn "C=CN, O=Alipay, CN=singapo.kiritostudio.com" --ca --outform pem >ca.cert.pem
ipsec pki --gen --outform pem > server.pem
ipsec pki --pub --in server.pem | ipsec pki --issue --cacert ca.cert.pem --cakey ca.pem --dn "C=CN, O=Alipay, CN=singapo.kiritostudio.com" --san="singapo.kiritostudio.com" --flag serverAuth --flag ikeIntermediate --outform pem > server.cert.pem
ipsec pki --gen --outform pem > client.pem
ipsec pki --pub --in client.pem | ipsec pki --issue --cacert ca.cert.pem --cakey ca.pem --dn "C=CN, O=Alipay, CN=singapo.kiritostudio.com" --outform pem > client.cert.pem
openssl pkcs12 -export -inkey client.pem -in client.cert.pem -name "client" -certfile ca.cert.pem -caname "singapo.kiritostudio.com" -out client.cert.p12
cp -r ca.cert.pem /usr/local/etc/ipsec.d/cacerts/
cp -r server.cert.pem /usr/local/etc/ipsec.d/certs/
cp -r server.pem /usr/local/etc/ipsec.d/private/
cp -r client.cert.pem /usr/local/etc/ipsec.d/certs/
cp -r client.pem /usr/local/etc/ipsec.d/private/Here is the a simpler command to install the certs, but you should replace yourdomain to your host domain:
ipsec pki --gen --outform pem > ca.pem && ipsec pki --self --in ca.pem --dn "C=CN, O=Alipay, CN=yourdomain" --ca --outform pem >ca.cert.pem && ipsec pki --gen --outform pem > server.pem && ipsec pki --pub --in server.pem | ipsec pki --issue --cacert ca.cert.pem --cakey ca.pem --dn "C=CN, O=Alipay, CN=yourdomain" --san="yourdomain" --flag serverAuth --flag ikeIntermediate --outform pem > server.cert.pem && ipsec pki --gen --outform pem > client.pem && ipsec pki --pub --in client.pem | ipsec pki --issue --cacert ca.cert.pem --cakey ca.pem --dn "C=CN, O=Alipay, CN=yourdomain" --outform pem > client.cert.pem && openssl pkcs12 -export -inkey client.pem -in client.cert.pem -name "client" -certfile ca.cert.pem -caname "yourdomain" -out client.cert.p12 && cp -r ca.cert.pem /usr/local/etc/ipsec.d/cacerts/ && cp -r server.cert.pem /usr/local/etc/ipsec.d/certs/ && cp -r server.pem /usr/local/etc/ipsec.d/private/ && cp -r client.cert.pem /usr/local/etc/ipsec.d/certs/ && cp -r client.pem /usr/local/etc/ipsec.d/private/Configuration for the network(router)
#not openvz:
iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -o eth0 -j MASQUERADE
#openvz:
iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -o venet0 -j SNAT --to-source ?.?.?.?
iptables -A FORWARD -s 10.0.0.0/24 -j ACCEPT
echo 1 > /proc/sys/net/ipv4/ip_forwardNote: ?.?.?.? is the Strongswan server ip address.
Now the Strongswan part is finished.
Install the FreeRadius
wget ftp://ftp.freeradius.org/pub/freeradius/freeradius-server-2.2.5.tar.gz
tar zxvf freeradius-server-2.2.5.tar.gz
cd freeradius-server-2.2.5/
./configure --with-mysql-dir=/usr/share/mysql/ --with-mysql-lib-dir=/usr/lib/mysql/
make
make installIf you met the heart bleed warning, you should do the following steps:
openssl version -a
apt-get purge openssl
apt-get autoremove && apt-get autoclean
tar xzvf openssl-1.0.1g.tar.gz
cd opemssl-1.0.1g
./config
make
make install
cp /usr/local/ssl/bin/openssl /usr/bin/
After that, change the /usr/local/etc/raddb/radiusd.conf from "allow_vulnerable_openssl = no" to "allow_vulnerable_openssl = yes"
Configuration of FreeRadius
The directory of the freeRadius is under:
/usr/local/etc/raddb/1) Add the following line to the dictionary file:
ATTRIBUTE Max-Monthly-Traffic 3003 integer
ATTRIBUTE Monthly-Traffic-Limit 3004 integer2) sites-enabled/default: Comment the line with unix and files, delete the comment flag for the sql
3) radiusd.conf: Delete the comment flag for the "include sql.conf"
4) clients.conf: Change the secret = testing123 under localhost section.
5) sql.conf: Change the following code as your database configuration in the sql section:
database = "mysql"
driver = "rlm_sql_${database}"
server = "localhost"
#port = 3306
login = "root"
password = "yourpass"
# Database table configuration for everything except Oracle
radius_db = "radius"6) sql/mysql/dialup.conf: Add the following line and comment other sql_user_name line
sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"Uncomment the simul_query_check line.
Create database
/usr/local/mysql/bin/mysql -uroot -p
create database radius;
grant all privileges on radius.* to radius@localhost identified by "radiuspassword";
flush privileges;
use radius;
source /usr/local/etc/raddb/sql/mysql/schema.sql;
exit;
Create the base information in db:
INSERT INTO radgroupreply (groupname,attribute,op,VALUE) VALUES ('user','Auth-Type',':=','Local');
INSERT INTO radgroupreply (groupname,attribute,op,VALUE) VALUES ('user','Service-Type',':=','Framed-User');
INSERT INTO radgroupreply (groupname,attribute,op,VALUE) VALUES ('user','Framed-IP-Address',':=','255.255.255.255');
INSERT INTO radgroupreply (groupname,attribute,op,VALUE) VALUES ('user','Framed-IP-Netmask',':=','255.255.255.0');
INSERT INTO radgroupreply (groupname,attribute,op,VALUE) VALUES ('user','Acct-Interim-Interval',':=','600'); -- traffic count time
INSERT INTO radgroupreply (groupname,attribute,op,VALUE) VALUES ('user','Max-Monthly-Traffic',':=','5368709120'); -- 5G
INSERT INTO radgroupcheck (groupname,attribute,op,VALUE) VALUES ('user','Simultaneous-Use',':=','1'); -- online device countAfter finished, it is better to have a local test, Now we add the test user:
INSERT INTO radcheck (username,attribute,op,VALUE) VALUES ('test','Cleartext-Password',':=','test');
INSERT INTO radusergroup (username,groupname) VALUES ('test','user');
Test code like the following below:
/etc/init.d/freeradius stop
radiusd -X &
radtest test test localhost 1649 testing123
If you receive "Access-Accept", and your local configuration is ok.
Add NAS clients
NAS is your strongswan client.
You only need to change the clients.conf file only, and just add the section like the following below:
client singapo {
ipaddr = NAS ip
netmask = 32
secret = yoursecret
nastype = other
shortname = singapo
with_ntdomain_hack = yes
coa_server = coa1
}
You can also add a coa_server in proxy.conf and add the following codes:
home_server coa1 {
type = coa
#
# Note that a home server of type "coa" MUST be a real NAS,
# with an ipaddr or ipv6addr. It CANNOT point to a virtual
# server.
#
ipaddr = strongswan_client_ip
port = 3799
# This secret SHOULD NOT be the same as the shared
# secret in a "client" section.
secret = kiritoauth
# CoA specific parameters. See raddb/proxy.conf for details.
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
#you must need a pre-proxy and a post-proxy
server kiritostudio.com {
pre-proxy {
update proxy-request {
NAS-IP-Address = 127.0.0.1
}
}
#
# Handle the responses here.
#
post-proxy {
switch "%{proxy-reply:Packet-Type}" {
case CoA-ACK {
ok
}
case CoA-NAK {
# the NAS didn't like the CoA request
ok
}
case Disconnect-ACK {
ok
}
case Disconnect-NAK {
# the NAS didn't like the Disconnect request
ok
}
# Invalid packet type. This shouldn't happen.
case {
fail
}
}
#
# These methods are run when there is NO response
# to the request.
#
Post-Proxy-Type Fail-CoA {
ok
}
Post-Proxy-Type Fail-Disconnect {
ok
}
}
}
If you set the Coa, and the kik user function is also be enabled. But the traffic have not been set yet, now we should do it with modifying sites-enabled/default:
######################################################################
#
# As of 2.0.0, FreeRADIUS supports virtual hosts using the
# "server" section, and configuration directives.
#
# Virtual hosts should be put into the "sites-available"
# directory. Soft links should be created in the "sites-enabled"
# directory to these files. This is done in a normal installation.
#
# If you are using 802.1X (EAP) authentication, please see also
# the "inner-tunnel" virtual server. You wll likely have to edit
# that, too, for authentication to work.
#
# $Id: 520ccbc90f3a09cd6a80e1e3b16000b7ba94d884 $
#
######################################################################
#
# Read "man radiusd" before editing this file. See the section
# titled DEBUGGING. It outlines a method where you can quickly
# obtain the configuration you want, without running into
# trouble. See also "man unlang", which documents the format
# of this file.
#
# This configuration is designed to work in the widest possible
# set of circumstances, with the widest possible number of
# authentication methods. This means that in general, you should
# need to make very few changes to this file.
#
# The best way to configure the server for your local system
# is to CAREFULLY edit this file. Most attempts to make large
# edits to this file will BREAK THE SERVER. Any edits should
# be small, and tested by running the server with "radiusd -X".
# Once the edits have been verified to work, save a copy of these
# configuration files somewhere. (e.g. as a "tar" file). Then,
# make more edits, and test, as above.
#
# There are many "commented out" references to modules such
# as ldap, sql, etc. These references serve as place-holders.
# If you need the functionality of that module, then configure
# it in radiusd.conf, and un-comment the references to it in
# this file. In most cases, those small changes will result
# in the server being able to connect to the DB, and to
# authenticate users.
#
######################################################################
#
# In 1.x, the "authorize", etc. sections were global in
# radiusd.conf. As of 2.0, they SHOULD be in a server section.
#
# The server section with no virtual server name is the "default"
# section. It is used when no server name is specified.
#
# We don't indent the rest of this file, because doing so
# would make it harder to read.
#
# Authorization. First preprocess (hints and huntgroups files),
# then realms, and finally look in the "users" file.
#
# Any changes made here should also be made to the "inner-tunnel"
# virtual server.
#
# The order of the realm modules will determine the order that
# we try to find a matching realm.
#
# Make *sure* that 'preprocess' comes before any realm if you
# need to setup hints for the remote radius server
authorize {
#
# Security settings. Take a User-Name, and do some simple
# checks on it, for spaces and other invalid characters. If
# it looks like the user is trying to play games, reject it.
#
# This should probably be enabled by default.
#
# See policy.conf for the definition of the filter_username policy.
#
# filter_username
#
# The preprocess module takes care of sanitizing some bizarre
# attributes in the request, and turning them into attributes
# which are more standard.
#
# It takes care of processing the 'raddb/hints' and the
# 'raddb/huntgroups' files.
preprocess
#
# If you want to have a log of authentication requests,
# un-comment the following line, and the 'detail auth_log'
# section, above.
# auth_log
#
# The chap module will set 'Auth-Type := CHAP' if we are
# handling a CHAP request and Auth-Type has not already been set
chap
#
# If the users are logging in with an MS-CHAP-Challenge
# attribute for authentication, the mschap module will find
# the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
# to the request, which will cause the server to then use
# the mschap module for authentication.
mschap
#
# If you have a Cisco SIP server authenticating against
# FreeRADIUS, uncomment the following line, and the 'digest'
# line in the 'authenticate' section.
digest
#
# The WiMAX specification says that the Calling-Station-Id
# is 6 octets of the MAC. This definition conflicts with
# RFC 3580, and all common RADIUS practices. Un-commenting
# the "wimax" module here means that it will fix the
# Calling-Station-Id attribute to the normal format as
# specified in RFC 3580 Section 3.21
# wimax
#
# Look for IPASS style 'realm/', and if not found, look for
# '@realm', and decide whether or not to proxy, based on
# that.
# IPASS
#
# If you are using multiple kinds of realms, you probably
# want to set "ignore_null = yes" for all of them.
# Otherwise, when the first style of realm doesn't match,
# the other styles won't be checked.
#
suffix
if (User-Name =~ /^.*\\\\\\\\(.*)/) {
update request {
Stripped-User-Name := "%{1}"
}
}
# ntdomain
#
# This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP
# authentication.
#
# It also sets the EAP-Type attribute in the request
# attribute list to the EAP type from the packet.
#
# As of 2.0, the EAP module returns "ok" in the authorize stage
# for TTLS and PEAP. In 1.x, it never returned "ok" here, so
# this change is compatible with older configurations.
#
# The example below uses module failover to avoid querying all
# of the following modules if the EAP module returns "ok".
# Therefore, your LDAP and/or SQL servers will not be queried
# for the many packets that go back and forth to set up TTLS
# or PEAP. The load on those servers will therefore be reduced.
#
eap {
ok = return
}
#
# Pull crypt'd passwords from /etc/passwd or /etc/shadow,
# using the system API's to get the password. If you want
# to read /etc/passwd or /etc/shadow directly, see the
# passwd module in radiusd.conf.
#
# unix
#
# Read the 'users' file
#files
#
# Look in an SQL database. The schema of the database
# is meant to mirror the "users" file.
#
# See "Authorization Queries" in sql.conf
sql
#
# If you are using /etc/smbpasswd, and are also doing
# mschap authentication, the un-comment this line, and
# configure the 'smbpasswd' module.
# smbpasswd
#
# The ldap module will set Auth-Type to LDAP if it has not
# already been set
# ldap
#
# Enforce daily limits on time spent logged in.
# daily
#
# Use the checkval module
# checkval
expiration
logintime
#
# If no other module has claimed responsibility for
# authentication, then try to use PAP. This allows the
# other modules listed above to add a "known good" password
# to the request, and to do nothing else. The PAP module
# will then see that password, and use it to do PAP
# authentication.
#
# This module should be listed last, so that the other modules
# get a chance to set Auth-Type for themselves.
#
pap
#
# If "status_server = yes", then Status-Server messages are passed
# through the following section, and ONLY the following section.
# This permits you to do DB queries, for example. If the modules
# listed here return "fail", then NO response is sent.
#
# Autz-Type Status-Server {
#
# }
# monthlytrafficcounter
if(Stripped-User-Name != ""){
if("%{sql: SELECT getMothlyUsageJudgement('%{Stripped-User-Name}')}" == "Yes"){
reject
}
}
else{
if("%{sql: SELECT getMothlyUsageJudgement('%{User-Name}')}" == "Yes"){
reject
}
}
}
# Authentication.
#
#
# This section lists which modules are available for authentication.
# Note that it does NOT mean 'try each module in order'. It means
# that a module from the 'authorize' section adds a configuration
# attribute 'Auth-Type := FOO'. That authentication type is then
# used to pick the apropriate module from the list below.
#
# In general, you SHOULD NOT set the Auth-Type attribute. The server
# will figure it out on its own, and will do the right thing. The
# most common side effect of erroneously setting the Auth-Type
# attribute is that one authentication method will work, but the
# others will not.
#
# The common reasons to set the Auth-Type attribute by hand
# is to either forcibly reject the user (Auth-Type := Reject),
# or to or forcibly accept the user (Auth-Type := Accept).
#
# Note that Auth-Type := Accept will NOT work with EAP.
#
# Please do not put "unlang" configurations into the "authenticate"
# section. Put them in the "post-auth" section instead. That's what
# the post-auth section is for.
#
authenticate {
#
# PAP authentication, when a back-end database listed
# in the 'authorize' section supplies a password. The
# password can be clear-text, or encrypted.
Auth-Type PAP {
pap
}
#
# Most people want CHAP authentication
# A back-end database listed in the 'authorize' section
# MUST supply a CLEAR TEXT password. Encrypted passwords
# won't work.
Auth-Type CHAP {
chap
}
#
# MSCHAP authentication.
Auth-Type MS-CHAP {
mschap
}
#
# If you have a Cisco SIP server authenticating against
# FreeRADIUS, uncomment the following line, and the 'digest'
# line in the 'authorize' section.
digest
#
# Pluggable Authentication Modules.
# pam
#
# See 'man getpwent' for information on how the 'unix'
# module checks the users password. Note that packets
# containing CHAP-Password attributes CANNOT be authenticated
# against /etc/passwd! See the FAQ for details.
#
# For normal "crypt" authentication, the "pap" module should
# be used instead of the "unix" module. The "unix" module should
# be used for authentication ONLY for compatibility with legacy
# FreeRADIUS configurations.
#
#unix
# Uncomment it if you want to use ldap for authentication
#
# Note that this means "check plain-text password against
# the ldap database", which means that EAP won't work,
# as it does not supply a plain-text password.
# Auth-Type LDAP {
# ldap
# }
#
# Allow EAP authentication.
eap
#
# The older configurations sent a number of attributes in
# Access-Challenge packets, which wasn't strictly correct.
# If you want to filter out these attributes, uncomment
# the following lines.
#
# Auth-Type eap {
# eap {
# handled = 1
# }
# if (handled && (Response-Packet-Type == Access-Challenge)) {
# attr_filter.access_challenge.post-auth
# handled # override the "updated" code from attr_filter
# }
# }
}
#
# Pre-accounting. Decide which accounting type to use.
#
preacct {
preprocess
#
# Session start times are *implied* in RADIUS.
# The NAS never sends a "start time". Instead, it sends
# a start packet, *possibly* with an Acct-Delay-Time.
# The server is supposed to conclude that the start time
# was "Acct-Delay-Time" seconds in the past.
#
# The code below creates an explicit start time, which can
# then be used in other modules.
#
# The start time is: NOW - delay - session_length
#
# update request {
# FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-Time}:-0}}"
# }
#
# Ensure that we have a semi-unique identifier for every
# request, and many NAS boxes are broken.
acct_unique
#
# Look for IPASS-style 'realm/', and if not found, look for
# '@realm', and decide whether or not to proxy, based on
# that.
#
# Accounting requests are generally proxied to the same
# home server as authentication requests.
# IPASS
suffix
if (User-Name =~ /^.*\\\\\\\\(.*)/) {
update request {
Stripped-User-Name := "%{1}"
}
}
# ntdomain
#
# Read the 'acct_users' file
#files
}
#
# Accounting. Log the accounting data.
#
accounting {
#
# Create a 'detail'ed log of the packets.
# Note that accounting requests which are proxied
# are also logged in the detail file.
detail
# daily
# Update the wtmp file
#
# If you don't use "radlast", you can delete this line.
# unix
#
# For Simultaneous-Use tracking.
#
# Due to packet losses in the network, the data here
# may be incorrect. There is little we can do about it.
# radutmp
# sradutmp
# Return an address to the IP Pool when we see a stop record.
# main_pool
#
# Log traffic to an SQL database.
#
# See "Accounting queries" in sql.conf
sql
if (User-Name =~ /^.*\\\\\\\\(.*)/) {
update request {
Stripped-User-Name := "%{1}"
}
}
#
# If you receive stop packets with zero session length,
# they will NOT be logged in the database. The SQL module
# will print a message (only in debugging mode), and will
# return "noop".
#
# You can ignore these packets by uncommenting the following
# three lines. Otherwise, the server will not respond to the
# accounting request, and the NAS will retransmit.
#
# if (noop) {
# ok
# }
#
# Instead of sending the query to the SQL server,
# write it into a log file.
#
# sql_log
# Cisco VoIP specific bulk accounting
# pgsql-voip
# For Exec-Program and Exec-Program-Wait
exec
# Filter attributes from the accounting response.
attr_filter.accounting_response
#
# See "Autz-Type Status-Server" for how this works.
#
# Acct-Type Status-Server {
#
# }
update disconnect {
User-Name = "%{User-Name}"
Acct-Session-Id = "%{Acct-Session-Id}"
NAS-IP-Address = "%{NAS-IP-Address}"
}
if(Stripped-User-Name != ""){
update control {
Send-CoA-Request = "%{sql: SELECT getMothlyUsageJudgement('%{Stripped-User-Name}')}"
}
}
else{
update control {
Send-CoA-Request = "%{sql: SELECT getMothlyUsageJudgement('%{User-Name}')}"
}
}
}
# Session database, used for checking Simultaneous-Use. Either the radutmp
# or rlm_sql module can handle this.
# The rlm_sql module is *much* faster
session {
# radutmp
#
# See "Simultaneous Use Checking Queries" in sql.conf
sql
}
# Post-Authentication
# Once we KNOW that the user has been authenticated, there are
# additional steps we can take.
post-auth {
# Get an address from the IP Pool.
# main_pool
#
# If you want to have a log of authentication replies,
# un-comment the following line, and the 'detail reply_log'
# section, above.
# reply_log
#
# After authenticating the user, do another SQL query.
#
# See "Authentication Logging Queries" in sql.conf
sql
#
# Instead of sending the query to the SQL server,
# write it into a log file.
#
# sql_log
#
# Un-comment the following if you have set
# 'edir_account_policy_check = yes' in the ldap module sub-section of
# the 'modules' section.
#
# ldap
# For Exec-Program and Exec-Program-Wait
exec
#
# Calculate the various WiMAX keys. In order for this to work,
# you will need to define the WiMAX NAI, usually via
#
# update request {
# WiMAX-MN-NAI = "%{User-Name}"
# }
#
# If you want various keys to be calculated, you will need to
# update the reply with "template" values. The module will see
# this, and replace the template values with the correct ones
# taken from the cryptographic calculations. e.g.
#
# update reply {
# WiMAX-FA-RK-Key = 0x00
# WiMAX-MSK = "%{EAP-MSK}"
# }
#
# You may want to delete the MS-MPPE-*-Keys from the reply,
# as some WiMAX clients behave badly when those attributes
# are included. See "raddb/modules/wimax", configuration
# entry "delete_mppe_keys" for more information.
#
# wimax
# If there is a client certificate (EAP-TLS, sometimes PEAP
# and TTLS), then some attributes are filled out after the
# certificate verification has been performed. These fields
# MAY be available during the authentication, or they may be
# available only in the "post-auth" section.
#
# The first set of attributes contains information about the
# issuing certificate which is being used. The second
# contains information about the client certificate (if
# available).
#
# update reply {
# Reply-Message += "%{TLS-Cert-Serial}"
# Reply-Message += "%{TLS-Cert-Expiration}"
# Reply-Message += "%{TLS-Cert-Subject}"
# Reply-Message += "%{TLS-Cert-Issuer}"
# Reply-Message += "%{TLS-Cert-Common-Name}"
# Reply-Message += "%{TLS-Cert-Subject-Alt-Name-Email}"
#
# Reply-Message += "%{TLS-Client-Cert-Serial}"
# Reply-Message += "%{TLS-Client-Cert-Expiration}"
# Reply-Message += "%{TLS-Client-Cert-Subject}"
# Reply-Message += "%{TLS-Client-Cert-Issuer}"
# Reply-Message += "%{TLS-Client-Cert-Common-Name}"
# Reply-Message += "%{TLS-Client-Cert-Subject-Alt-Name-Email}"
# }
# MacSEC requires the use of EAP-Key-Name. However, we don't
# want to send it for all EAP sessions. Therefore, the EAP
# modules put required data into the EAP-Session-Id attribute.
# This attribute is never put into a request or reply packet.
#
# Uncomment the next few lines to copy the required data into
# the EAP-Key-Name attribute
# if (reply:EAP-Session-Id) {
# update reply {
# EAP-Key-Name := "%{reply:EAP-Session-Id}"
# }
# }
# If the WiMAX module did it's work, you may want to do more
# things here, like delete the MS-MPPE-*-Key attributes.
#
# if (updated) {
# update reply {
# MS-MPPE-Recv-Key !* 0x00
# MS-MPPE-Send-Key !* 0x00
# }
# }
#
# Access-Reject packets are sent through the REJECT sub-section of the
# post-auth section.
#
# Add the ldap module name (or instance) if you have set
# 'edir_account_policy_check = yes' in the ldap module configuration
#
Post-Auth-Type REJECT {
# log failed authentications in SQL, too.
sql
attr_filter.access_reject
}
}
#
# When the server decides to proxy a request to a home server,
# the proxied request is first passed through the pre-proxy
# stage. This stage can re-write the request, or decide to
# cancel the proxy.
#
# Only a few modules currently have this method.
#
pre-proxy {
# attr_rewrite
# Uncomment the following line if you want to change attributes
# as defined in the preproxy_users file.
# files
# Uncomment the following line if you want to filter requests
# sent to remote servers based on the rules defined in the
# 'attrs.pre-proxy' file.
# attr_filter.pre-proxy
# If you want to have a log of packets proxied to a home
# server, un-comment the following line, and the
# 'detail pre_proxy_log' section, above.
# pre_proxy_log
}
#
# When the server receives a reply to a request it proxied
# to a home server, the request may be massaged here, in the
# post-proxy stage.
#
post-proxy {
# If you want to have a log of replies from a home server,
# un-comment the following line, and the 'detail post_proxy_log'
# section, above.
# post_proxy_log
# attr_rewrite
# Uncomment the following line if you want to filter replies from
# remote proxies based on the rules defined in the 'attrs' file.
# attr_filter.post-proxy
#
# If you are proxying LEAP, you MUST configure the EAP
# module, and you MUST list it here, in the post-proxy
# stage.
#
# You MUST also use the 'nostrip' option in the 'realm'
# configuration. Otherwise, the User-Name attribute
# in the proxied request will not match the user name
# hidden inside of the EAP packet, and the end server will
# reject the EAP request.
#
eap
#
# If the server tries to proxy a request and fails, then the
# request is processed through the modules in this section.
#
# The main use of this section is to permit robust proxying
# of accounting packets. The server can be configured to
# proxy accounting packets as part of normal processing.
# Then, if the home server goes down, accounting packets can
# be logged to a local "detail" file, for processing with
# radrelay. When the home server comes back up, radrelay
# will read the detail file, and send the packets to the
# home server.
#
# With this configuration, the server always responds to
# Accounting-Requests from the NAS, but only writes
# accounting packets to disk if the home server is down.
#
# Post-Proxy-Type Fail {
# detail
# }
}
And you should also listen the coa respond in radius.conf, and add theses lines:
listen {
ipaddr = *
type = coa
}I'm not sure the configutation is right, but it is finished.